Extension kit for stern thruster, 300mm
| Supplier | Vetus | ||||
| Manufacturer Ref | |||||
| Ocean Planet Ref | SDKIT300 | ||||
| Additional |
|
||||
| List Price | £749.17 | ||||
For the stern thruster to function correctly, it is important that the propeller is submerged well below the waterline. If this is not the case, the propeller may suck air into the tunnel, with a considerable loss of thrust power as a consequence. However, on some boats this is not really feasible, because the draught at the stern is too shallow and because the thruster assembly should never protrude beneath the bottom of the boat. In order to ensure both tunnel openings are sufficiently below the waterline, VETUS has developed an extension kit for stern thrusters. This kit consists of two shells made of GRP, together with all the necessary stainless steel fastenings. The kit can be easily retrofitted to existing installations. It should be used if the transom is fitted with other equipment, which may prevent unhindered water flow through the tunnel. It is also ideal for so-called 'house boats', which in general have a very shallow draught both at the bow and at the stern.
Thruster SystemsLocated in Sabadell (Barcelona), Mikalor Hose Clamps is specialised in the manufacture of the complete range of standard metal hose clamps, particularly the ASFA range. Special clamps for the automotive sector like the ASFA Constant Tension range are also manufactured here.
With the aim of guaranteeing zero defects in the whole clamp range, our production process is fully automated and is controlled using latest technology in artificial vision cameras.
